FAQ
Frequently asked questions
How to Troubleshoot Dry Vacuum Pump Faults?
When a fault occurs, it should be addressed with a calm and professional approach. For the failure to achieve vacuum in the pump chamber, the first step is to thoroughly inspect the intake piping and filters to ensure they are not blocked by foreign matter. If a blockage is found, clean or replace the affected components immediately. At the same time, check for air leaks in the pump chamber, which are often caused by wear on seals and sealing surfaces. If damage or aging is confirmed, replace the seals promptly to restore sealing integrity. In addition, sticking or jamming of rotating parts is a common cause of vacuum failure; in such cases, carefully clean or replace the stuck components.
When the pressure differential across the pump chamber becomes excessive, first check whether the exhaust piping is clear. If a blockage is detected, clear or replace the blocked section without delay. Also, ensure that the seals are properly tightened and correctly positioned. The wear condition of the drive-end shaft seal should not be overlooked; if severely worn, replace it in a timely manner to ensure proper pump operation.
Furthermore, abnormal noise from the pump chamber is a fault signal that should not be ignored. This typically indicates possible damage to bearings or gears. In such cases, replace the worn or damaged parts promptly to maintain reliable operation. Additionally, pay attention to the lubrication status of bearings and gears, and apply appropriate lubricant to reduce friction and wear.
To better manage vacuum equipment, it is advisable to document fault events in a timely manner. Each record should include details such as the fault symptom, the corrective actions taken, and the maintenance date. This practice supports future maintenance and troubleshooting efforts, helps maintenance personnel understand the equipment's operating condition, and provides valuable data for ongoing upkeep and preventive maintenance.
Previous Page
Next Page
Previous Page
Next Page
WeChat Official Account
Beijing Grand Hitek Co.,Ltd
Telephone:+86-10-86229784
E-mail:sales@grandhitek.com.cn
Headquarters address: No. 1, Kechuang 15 Jie (St) , Beijing Economic Technological Development Area
Hebei base: Building 9, Environmental Protection Industrial Park, South District, Gu'an County Industrial Zone, Langfang City
Hubei base: Attached fifth floor, Commercial Building, No. 366, Lin Konggang Avenue, Jinghe Street, Dongxihu District, Wuhan
Zhejiang base: Building 17, No. 2723, Fuchunwan Avenue, Chunjiang Street, Fuyang District, Hangzhou
Shaanxi base: Building 2, No. 46, Zhangbawu Road, Xi'an High-tech Zone
Shanghai Base: Building 9, Fuhai Business Court, Lane 299, Bisheng Road, Pudong New District, Shanghai
Minhang Base: Building 4, No. 99 Suijiang Road, Minhang District, Shanghai
Sichuan Base: Building 9, No. 665 Fujia Street, Huangjia Street, Chengdu Shuangliu Economic Development Zone, Shuangliu District, Chengdu City
Copyright©Beijing Grand Hitek Co.,Ltd Powered by 300.cn | Label | Privacy Policy