FAQ
Frequently asked questions
Dry Vacuum Pump Faults and Troubleshooting?
When a fault occurs, it should be addressed with a calm and professional approach. Below are common failure scenarios and their recommended solutions:
1. Failure to achieve vacuum in the pump chamber
First, carefully inspect the intake piping and filters to ensure they are not blocked by foreign matter. If a blockage is found, immediately clean or replace the affected components. At the same time, check for air leaks in the pump chamber – these are often related to wear on seals and sealing surfaces. If damage or aging is confirmed, replace the seals promptly to restore sealing integrity. In addition, sticking or jamming of rotating parts is a common cause of vacuum failure. In such cases, thoroughly clean or replace the stuck components.
2. Excessive pressure differential in the pump chamber
Start by checking whether the exhaust piping is clear. If a blockage is detected, clear or replace the blocked section without delay. Also, ensure that the seals are properly tightened and correctly positioned. The condition of the drive-end shaft seal should not be overlooked; if severely worn, replace it in a timely manner to ensure normal pump operation.
3. Abnormal noise from the pump chamber
Unusual noise is often a sign of bearing or gear damage. In this situation, replace the worn or damaged parts promptly to maintain reliable operation. Additionally, check the lubrication status of bearings and gears, and apply appropriate lubricant to reduce friction and prevent further wear.
4. Maintenance record-keeping
To better manage vacuum equipment, it is recommended to document all fault events in a timely manner. Each record should include details such as the fault symptom, corrective action taken, and the maintenance date. This practice supports future equipment maintenance and troubleshooting efforts, helps maintenance personnel better understand the equipment’s operating condition, and provides valuable data support for ongoing upkeep and preventive maintenance.
Previous Page
Previous Page
WeChat Official Account
Beijing Grand Hitek Co.,Ltd
Telephone:+86-10-86229784
E-mail:sales@grandhitek.com.cn
Headquarters address: No. 1, Kechuang 15 Jie (St) , Beijing Economic Technological Development Area
Hebei base: Building 9, Environmental Protection Industrial Park, South District, Gu'an County Industrial Zone, Langfang City
Hubei base: Attached fifth floor, Commercial Building, No. 366, Lin Konggang Avenue, Jinghe Street, Dongxihu District, Wuhan
Zhejiang base: Building 17, No. 2723, Fuchunwan Avenue, Chunjiang Street, Fuyang District, Hangzhou
Shaanxi base: Building 2, No. 46, Zhangbawu Road, Xi'an High-tech Zone
Shanghai Base: Building 9, Fuhai Business Court, Lane 299, Bisheng Road, Pudong New District, Shanghai
Minhang Base: Building 4, No. 99 Suijiang Road, Minhang District, Shanghai
Sichuan Base: Building 9, No. 665 Fujia Street, Huangjia Street, Chengdu Shuangliu Economic Development Zone, Shuangliu District, Chengdu City
Copyright©Beijing Grand Hitek Co.,Ltd Powered by 300.cn | Label | Privacy Policy